Our wraps are designed for DIY installation. With patience and care, most boat owners can achieve great results. We provide detailed instructions with each kit, and the bubble-free adhesive technology makes application easier.

Each kit comes with a squeegee applicator. You'll also need:

• Clean lint free rags
• cleaning fluids, we reccomend a soapy water solution and a alcohol type cleaner like isopropel alcohol, methylated spirits or a prepsol/prep wash.
• A sharp utility knife
• A heat gun or hair dryer
• Not nessesarry, but a clear sealing pen, these are available at most auto stores or even clear nail polish would work, this is generally used on the outer edges of the graphic for increased durability.

With proper care and maintenance, our wraps can last 7+ years. Factors like sun exposure, storage conditions, and water type can affect longevity. If the wrap is kept out of direct sunlight when not in use, kept clean and maintained and installed correclty you could see up to 7-10 years.

Yes, our wraps are designed to be removable without damaging the underlying surface when properly removed. We recommend using heat to soften the adhesive during removal. That being said this is heavily dependant on the condition of your surface, if there is damage/cracks etc the vinyl may remove some paint/coating from around these imperfections.

Our vinyl is repositionable during application, allowing you to lift and reapply if needed. This makes positioning the graphic much easier, once in positions you can apply firm pressure to pin the graphic in place.

If you encounter significant issues, contact our customer support for guidance.

We recommend hand washing your wrapped boat. Automatic boat washes may be too abrasive and could damage the wrap.

If pressure cleaning ensure you dont aim at the edge of the print, work from the centre out so not to put any pressure against the edges and you will be fine. 

While we don't offer formal warranties, we stand behind the quality of our products. If you encounter any issues with material defects, please contact our customer service.

Yes, our wraps are designed to cover existing colors and patterns. All of our wrap materials include a blockout layer so this will cover any colour behind the graphic

Minor imperfections can often be covered by the wrap. However, significant damage or rust should be repaired before wrapping for best results.  Our vinyl is very thin and conformable so cracks or blemishes will still be seen, you can sand these prior to install and generally get great results.